calibration unit
英 [ˌkælɪˈbreɪʃn ˈjuːnɪt]
美 [ˌkælɪˈbreɪʃn ˈjuːnɪt]
网络 校准单元; 校准单位; 校验单元
双语例句
- Make sure that you do your calibration of sensors with the same power supply unit that you intend to use in the field.
请确保您进行传感器校准所用的供电单元与将来在现场使用的供电单元是相同的。 - A Field Calibration Method for Zero Bias of Inertial Measurement Unit
惯性测量组合零偏的一种现场标定方法 - Contained within the ECM is a removable calibration unit, on programmable read-only memory.
包含在ECM内的是一个可动的校正装置，或是可编程序的读存储器。 - Calibration for Strapdown Inertial Measurement Unit Without Orientation Adjustment
光纤捷联惯性测量组件在无安装基准时标定方法 - Note: In the first gun calibration of a new unit, the green LEFT GUN and blue RIGHT GUN cursors will probably not appear on the screen before the calibration is completed, which is a normal situation.
注意：新机台第一次校枪时，可能在校枪晚生前不会出现屏幕上的绿色LEFTGUN和蓝色RIGHTGUN光标，这是正常现象。 - Calibration by the headlight control unit is not required therefore as the required signals are evaluated directly by the headlight control units.
当所需信号由前照灯控制单元直接评估后，将不再需要前照灯控制单元进行校准。 - Amplitude calibration unit transmitter collimating optics
振幅校准器振幅测量器发射器准直光学装置 - Analysis and calibration of complex control system in urea unit
尿素装置复杂控制系统简析与仪表调试 - Design and calibration for an inertial measurement unit using MEMS sensors
MEMS传感器的惯性测量模块的设计与初始校准 - By means of analysis on calibration data of reconstructed unit, it was proved that: the application of DJ-3 type tray on Yan Lian reforming unit was successful.
通过对改造后装置的标定数据分析，证明DJ3型塔板在延炼重整装置的应用是成功的。 - The self-calibration method can solve the problem of conventional calibration affected by the manufacturing precision of standard unit and light intensity, and can increase the calibration accuracy and decrease the cost.
提出自标定技术解决了传统标定受标准件加工尺寸精度和光强影响的问题，提高了标定的准确度并降低了成本。 - An automatic calibration unit for gas flowmeters
气体流量计自动检定装置 - This article introduces a new type of calibration unit for oil flowmeters ── the working theory, technology, property, application scope, engineering, installation and calibrating problems of actual application of standard horizontal single ball volume tube.
介绍一种新型油品计量标定装置&单球卧式标准体积管的工作原理、技术特点、应用范围、工程设计、安装以及实际应用中的标定问题。 - A low cost calibration system for micro inertial measurement unit ( MIMU) has been designed.
设计了一台低成本的微惯性测量组合标定系统。 - The software calibration for microprocessor measuring unit
测量环节的软件校准 - A New Type of Calibration Unit for Oil Flowmeters ── Engineering and Application of Standard Horizontal Single Ball Volume Tube
一种新型油品计量标定装置&单球卧式标准体积管的工程设计及应用 - A non-destructive calibration unit for tool/ work thermocouples is presented in the paper.
介绍了一种刀具&工件自然热电偶无损标定装置。 - A new calibration technique was proposed for strapdown inertial measurement unit according to simplified model of ring laser gyro ( RLG) and quartz accelerometer.
根据激光陀螺和石英加速度计的简化输出模型，推导并提出了一种新的激光陀螺惯性测量组合标定方法。 - Composite Water Flow Calibration Facility that our unit designed, makes up of standard metal tank group, standard flow meter, water-supply system, pipeline system, control cabinet and diverter mainly.
本单位设计的水流量综合标准装置，主要由标准金属量器组、标准流量计、供水系统、管路系统、控制台和换向器组成。 - This system contains pressure scanner modules and a pressure calibration unit of an original electronically scanning pressure measurement system ( PSI 780B), a multi channel A/ D converter, a personal minicomputer ( PC 486) and a new designed pressure multiplexer interface.
它是由原电子扫描测压系统PSI780B的传感器模块及其校正单元、与多通道高速A／D板、PC486微机和新设计的测压点选通接口组成。 - Calibration and cooling unit are essential to accurate outer diameter and wall thickness so as to avoid stretch orientation and eliminate inner stress of the pipes.
定径和冷却装置为管材形成精确的外径和壁厚、避免管材拉伸取向、消除管材内应力。 - An electrically-controlled calibration platform of diesel is introduced based on CCP ( CAN Calibration Protocol) after the study of CCP, and reliable, precise communication is created between calibration system and ECU ( Electronically Controlled Unit).
在分析研究CCP的基础上，开发了基于CCP的电控柴油机标定系统平台，实现了标定系统与ECU之间准确、可靠的数据通讯。 - Development of a Calibration System for Electronic Unit Pump with Multi-stations
电控单体泵多节点标定系统的研发 - The improvement of low air velocity calibration apparatus& "whirling arm" unit
低风速分度与校正设备-旋臂机-的制造研究 - The article points out the problems for the term inconsistence in volume flowrate meter calibration procedures and measure unit, and the same object with several terms.
指出了我国容积式流量计检定规程中存在的词语不规范、同一物体出现几个名称、计量单位不统一等问题。 - A novel stator flux observer model of DTC control system, the model substitutes one order low-pass filter for pure integration unit and adopts PI close-loop calibration unit to compensate the DC drift error of stator flux observer were introduced.
现提出了一种新型的直接转矩控制系统的定子磁链观测模型，采用一阶低通滤波器替换u-i模型中的纯积分环节，并引入PI闭环校正环节来补偿磁链观测的直流偏置误差。 - A non-destructive calibration unit for tool/ work thermocouples
刀具&工件自然热电偶无损标定装置 - Research on Calibration System of Micro Inertial Measurement Unit
微惯性测量组合标定系统的研究 - Torque Calibration of Coupling Screw-on Unit
接箍拧紧机的扭矩校准